R35 MAF Max load/Factory load
Moderator: Matt
R35 MAF Max load/Factory load
What is difference between max load and factory load in Maf selection menu?
Re: R35 MAF Max load/Factory load
Depends on the tube size.
For the 3" tube size the max load / factory load are the same
For the 3.5" -4" tube size, we tend to keep factory load close to what a Z32 MAF can do (so not full capacity) but max load is the absolute maximum load the MAF can read in that tube size.
We have noted that 4" tube without reducer (say to 3.5" or 3") may result in unstable airflows.
We calibrated the curves on my R34 using 3" pipes with reducers from the MAF pipe
For the 3" tube size the max load / factory load are the same
For the 3.5" -4" tube size, we tend to keep factory load close to what a Z32 MAF can do (so not full capacity) but max load is the absolute maximum load the MAF can read in that tube size.
We have noted that 4" tube without reducer (say to 3.5" or 3") may result in unstable airflows.
We calibrated the curves on my R34 using 3" pipes with reducers from the MAF pipe