Page 1 of 3
NIStune 0.9112 now available
Posted: Wed Nov 14, 2007 1:14 am
by Matt
Available in the download section
8 Bit ECUs will need their address files updated to update the O2 Sensor feedback value from flag settings to a temperature value supported in this latest version
Edit your ADR file in notepad or similar editor:
Change line
#Feedback control
FB_SWITCH,&Hxxxx,1,1,1,1,Feedback control
to
#Feedback control
O2_FEEDBACK_TEMP,&Hxxxx,1,1,1,1,Feedback control
Fixes and enhancements since 0.9110 release
10357 IAT not operational
10422 Data from consult/wideband not synced properly
10510 Moates doesn’t work on 27C512 socket on R33 board
10424 Zexel ECU consult broken by 10423
10525 Zexel injection 50 - 500ms
10526 Zexel O2 RHS - Maps to boost/MAP sensor input
10528 Zexel ECU connects not always working
10529 Finish off selectable gauges coding
10535 VE maptracing on RPM incorrect for S14 KA
10359 Disable close windows together: does not allow individual window reopen
10360 O2 feedback flags not displaying comp value
10362 Alpha, alpha learn and exhaust temp wrong scales
10363 Enable mulitple windows does not stay enabled in config menu
10494 Logging aux name not displayed
10357 Comp values incorrect for constant windows
10358 Zeitronix older models send 13 bytes instead of 14
10507 Have specific directories for wideband files and allow user to select dir
10452 Append Timestamp/Number option after each log
10509 TP injection for emulator streaming
10530 Allow large guages (2x2) for display
10455 Cannot make maps below 14.7 AFR
10358 B13 consult and maptrace not working (calumsult)
10520 Win98 emulator connect 'operation completed successfully' appears
10521 Emulator shows () at end (normally for odd/even?) in split mode 8 bit
10356 Windows not showing
10562 Consult auto detect type
10506 Resizing log window has affected start/finish/scroller operation
10531 Logging problem: Requests overwrite log file
10562 Tab ordering in log and config windows needs fixing
10561 Guages missing boxes
10526 DLP A/D converter crashes in NIStune XP
10527 DLP A/D converter crashes when NIStune shutdown whilst thread running
10505 Reconcile not working on S15 stock rom. Doesn’t do anything!
10499 Add extra display room in stalins for enrichment/percentage for Z32/Q45
10456 Logging erasing files after record/playback
10556 Filtered values cause 64 to be added to all cells in fuel table (S13)
10558 After copy/paste sometimes cells need refresh to readjust colours
10326 Fix up copy/paste/cut/select all with 3D grid (gets rpm/tp scales now)
10381 Map view large size, fonts don’t size well
10498 Logging reports aux name values which don’t recognise on playback
10504 R32 Idle ignition timing not right
10556 Split log playback is broken. Graph not reflecting values displayed
10571 Zexel ECU not connecting in 0.9111G
10570 Add O2 feedback temperature constant
10351 Add image selection for mulitple image ROMs
10384 Playback view allow resize window
10392 Use percentage adjustment for K constant
10423 Alarms on display window. And make 'in front' window tickable
10451 Preconfigured dropdown boxes for logging playback
10532 Lock editing to cell when ENTER pressed during maptrace
10553 Consult progress indications for connectivity display
10496 Add min values on guages also. Offer ability to reset
10550 Record mode - press stop. Stays. Press play. No registers found
10490 Clear dtc operation cannot be performed in tuner mode
As usual the nistune_buglist.xls file contains the current list of outstanding bugs and enhancements and their priority
Posted: Thu Nov 15, 2007 1:19 am
by Matt
0.91121 has been uploaded with some more updates
10523 TechEdge not working/updating properly when Win98 / 0.9111a
10557 Techedge not working/displaying updates in 0.9111d
10440 SR20 display filter change 0.9112 affecting R32 RB20
Changes to reduce wideband speed by taking out a sleep cycle caused other problems with wideband not receiving all serial events. Caused problems with units such as TechEdge on slower machines
Tested out on my win98 laptop using TechEdge, Consult and Emulator serial coms with a small delay introduced and works again now
0.91122 now available
Posted: Fri Nov 16, 2007 12:55 am
by Matt
0.91122 now available
Fix to DLP A/D converter to report AFRs correctly now
Also added address file VERSION parameter. The version number will be reported in the top title bar. If the address file doesnt have a version number then just 0 will be displayed
As address files are updated version numbers will increases and notification will be made on the forums of the latest version
Latest software version also has restrictions for Individual Users license now implemented. Real time tuning is locked to the first 3 x Address files and 5 x different ECU IDs used with NIStune
These restrictions do not apply to the unlimited use Tuners License
You can still perform normal map editing and consult logging display and usual connectivity if you exceed these limits, just the real time portion is capped so that workshops who tune commercially use the correct license
This also opens the possibility for address files to become more freely available in the future
Posted: Fri Nov 16, 2007 6:40 pm
by SSS
IAT works beautifully on the U12, thanks.
However battery voltage remains fixed at 11.99 volts and does not change.
Posted: Sat Nov 17, 2007 8:28 am
by kenbam
Matt.
I still cannot get my tech edge WB sensor to work, i have to go back to version 0.9110 to get it to work, which means i dont get the updated software, and it expires in 16 days.
Posted: Sat Nov 17, 2007 9:09 am
by Matt
Hi Ken
Can you please email me through a description of the exact problem you are seeing (eg. does not connect or no display update in data) and a log with only the TechEdge enabled (ie no consult data)?
File-Configuration-Debug Logging
Log files saved to C:\Program Files\NIStune\logs\*.log
I did a code compare between 0.9110 and 0.9111 and found the problem which was causing no data received onl slower machines... so pulled out the change and made the timing loop run faster.
Checked it with WinXP and Win98 prior to releasing so I'm suprised its not working. The log will let me know whats going on. I'll get it resolved this week before your current version expires
Posted: Sat Nov 17, 2007 9:12 am
by Matt
I'll look into the battery value in USB consult also. Dont have a KA24E ECU to test so I'll have to try it out on CA18/R31.
Assume this worked fine in 0.9110?
Posted: Sat Nov 17, 2007 10:25 am
by kenbam
The messages that do come up are to fast to see, then it comes up with no communication. i captured a screen shot and have attached that and the log file.
It is configured for the correct port, works on the earlier versions of nistune and has no trouble connecting to com port 3 with tewblog and WBconfig.
Thanks Matt
Posted: Sat Nov 17, 2007 2:51 pm
by Matt
Thanks. I'll grab Petes Techedge and have another look into it Monday night
Its receiving data but gets out of sync and then fails
Re: NIStune 0.9112 now available
Posted: Sat Nov 17, 2007 8:36 pm
by JCD
Matt, does this apply to my Type 1 rev 3A?
Regards,
Jean
Matt wrote:
8 Bit ECUs will need their address files updated to update the O2 Sensor feedback value from flag settings to a temperature value supported in this latest version
Edit your ADR file in notepad or similar editor:
Change line
#Feedback control
FB_SWITCH,&Hxxxx,1,1,1,1,Feedback control
to
#Feedback control
O2_FEEDBACK_TEMP,&Hxxxx,1,1,1,1,Feedback control
Posted: Sat Nov 17, 2007 11:42 pm
by SSS
Matt wrote:I'll look into the battery value in USB consult also. Dont have a KA24E ECU to test so I'll have to try it out on CA18/R31.
Assume this worked fine in 0.9110?
It hasn't worked in the last 2 releases, if my memory serves me correctly.
Posted: Sun Nov 18, 2007 12:46 am
by Matt
Actually I have a S13 240SX KA24E ECU here still to get working... I'll see how that goes with the battery voltage on that. It must be getting some reading to get that figure. But it stays steady? never updates?
Ken - I did another file compare and noticed that I didn't remove one of my 'extra' changes out of the code. This has now been removed and I have put up a test version 0.91122a in the release area
I cant try it out until Tuesday but if you are able to give it a shot at all earlier then it might work out for you okay...
Posted: Sun Nov 18, 2007 12:55 am
by Matt
Yes it does. Edit your address file or email me and I can send you an updated one
Posted: Sun Nov 18, 2007 1:52 am
by JCD
Matt wrote:Yes it does. Edit your address file or email me and I can send you an updated one
As notepad is just within my capabilities I thought I'll give it a go myself
But there is no such line in my address file:
#Feedback control
FB_SWITCH,&Hxxxx,1,1,1,1,Feedback control
so nothing to edit, or should I insert it somewhere?
Posted: Sun Nov 18, 2007 9:48 am
by kenbam
Matt wrote:Actually I have a S13 240SX KA24E ECU here still to get working... I'll see how that goes with the battery voltage on that. It must be getting some reading to get that figure. But it stays steady? never updates?
Ken - I did another file compare and noticed that I didn't remove one of my 'extra' changes out of the code. This has now been removed and I have put up a test version 0.91122a in the release area
I cant try it out until Tuesday but if you are able to give it a shot at all earlier then it might work out for you okay...
Matt.
I tried it, same thing. not working.
Edit: attached log from this mornings attempt.