Alternate rb26 Address file

Nistune topics related specifically to the 6303 cpu

Moderator: Matt

Post Reply
adriano
 

Posts: 4
Joined: Mon Jan 28, 2008 7:10 am
Location: Sydney

Alternate rb26 Address file

Post by adriano »

Hi, a mate and i have spent a lot of time going through remapping rb26's, and have another address file that you may wish to consider. There is more to come, and some bits that we will have to confirm on the dyno, but i believe that its more correct than the original one, and far more comprehensive.
Attachments
r32-gtr-adrian-001.adr
(2.67 KiB) Downloaded 188 times
Matt
Site Admin
 

Posts: 8993
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

I've had a quick check

I dont think the address 7200 is off boost fuel because I've checked the code on this one and found that there is only one fuel map

That address is the boost duty map which doesnt have any indexes

Thanks I'll have a looka t the ADD_FUEL ones

Okay so fuel recover/cut are wrong way around? Recover should be lower than cut

I'll go over the others when I have some time.

Thanks for posting this

What figures are you getting for your GTR?
adriano
 

Posts: 4
Joined: Mon Jan 28, 2008 7:10 am
Location: Sydney

Post by adriano »

Hoping to get between 450-500rwkw depending on how brave i am. Nistune will be used in conjunction with a fairly advanced water/methanol injection system.
Post Reply