Page 1 of 1
Alternate rb26 Address file
Posted: Fri May 09, 2008 7:38 pm
by adriano
Hi, a mate and i have spent a lot of time going through remapping rb26's, and have another address file that you may wish to consider. There is more to come, and some bits that we will have to confirm on the dyno, but i believe that its more correct than the original one, and far more comprehensive.
Posted: Fri May 09, 2008 10:15 pm
by Matt
I've had a quick check
I dont think the address 7200 is off boost fuel because I've checked the code on this one and found that there is only one fuel map
That address is the boost duty map which doesnt have any indexes
Thanks I'll have a looka t the ADD_FUEL ones
Okay so fuel recover/cut are wrong way around? Recover should be lower than cut
I'll go over the others when I have some time.
Thanks for posting this
What figures are you getting for your GTR?
Posted: Wed May 14, 2008 8:03 pm
by adriano
Hoping to get between 450-500rwkw depending on how brave i am. Nistune will be used in conjunction with a fairly advanced water/methanol injection system.