Page 1 of 1
consult not connected
Posted: Sun Jun 08, 2008 9:40 pm
by quickgtir
Hi there,
i am using the blazt-serial connecting cable, until now i was just working with nissan data scan with which it was working perfectly. Now i am trying to use the blazt cable to connect to NisTune, but always i get the message "consult not connected".
Posted: Sun Jun 08, 2008 11:19 pm
by Matt
What vehicle / engine are you trying to connect to?
Which address file are you loading?
for RNN 14
Posted: Tue Jun 10, 2008 5:34 am
by quickgtir
Hi Matt,
using it for an RNN 14 with sr20det. Have the Adressfile of S13. have any idea?
thanx
Jakob
Posted: Tue Jun 10, 2008 11:19 am
by Matt
So NissanDataScan connects okay with the board installed but NIStune doesnt connect at all?
Can you please send a debug log through to me (see sticky in software thread)
Posted: Mon Jun 16, 2008 5:31 am
by quickgtir
i am using a USB to Serial converter no, and it is working.
thanx matt
Posted: Mon Jun 16, 2008 12:55 pm
by Matt
Okay. Bit strange. So before, just plugged into serial port wasnt working but now using USB-serial it works fine?
If you still want me to look into it, let me know and I can have a look through the debug log file