Where are the fuel trims

If it isnt a problem or a suggestion it probably goes here.

Moderator: Matt

Post Reply
darb2464
 

Posts: 2
Joined: Sun Dec 23, 2007 9:08 pm
Location: Yamba NSW

Where are the fuel trims

Post by darb2464 »

Hi I have been playing with nistune for two weeks with sr20 det,550cc inj , Know I have everthing going fine, I am just trying set the fuel trim level af learm is 118 at cruise, with wideband readings of 14.8 at cruise . light throtle 13.5 and 11.8 at wot, Once i sought this out ,I will try a vy airflow meter :shock:
datsunboy
 

Posts: 106
Joined: Thu Mar 15, 2007 1:51 pm
Location: New Zealand

Post by datsunboy »

whats a vy airflow meter?
fuel trim?....have you tried adjusting the K-value?
kenbam
 

Posts: 131
Joined: Sat Sep 15, 2007 9:46 am

Post by kenbam »

vy commodore?

Not sure that will work, i almost certain they contain a built in frequency oscillator, which means its not an analog signal to the ECU, but a varying frequency signal. I'm sure it peaks at around 12000 hertz.
darb2464
 

Posts: 2
Joined: Sun Dec 23, 2007 9:08 pm
Location: Yamba NSW

Yeh the fuel trim .

Post by darb2464 »

I am just trying to work out on the fuel trim learn . what is correct reading ?.. When I use me hp tuners we set the fuel trim at -4 as the fuel trim map reading scale is -25 to 25+. Yes i just look up the vy airflow meter on the workshop manual and the return signal is in hetz.
Post Reply