Nistune Forums

Hi,

I have problem with Consult Connection. When I hit button USBConsult in 95% appear window with "Consult Communications Error, Unable to read all consult register data"

Where is problem? It is bad address file for my ECU?

Type 1 bord rev3+ Z31 turbo year 1987.

Thanks for help.

I tried everything, another computer, cable, drivers, fresh windows and no change.

I inspect ECU and I found problem. PIN number 1 was broken. I think it can be my problem.

ECU is back in workshop and they must repair this pin.

Do you think Matt if it solve my problem with random connecting to Consult?
Car was runing fine.

Once they repair that pin you will know for sure. It is most likely due to this. When it connects it tries to download the consult register table, and then checks it

If its not valid it could be reading the wrong memory address because of the broken address pin

Hi Matt,

ECU is repaired, Engine is working but i still cannot connect to USB Consult.

Still same error.

Have you any idea, what can i try?

Thansk for help.

Hi can you please send me a debug log file through.

Enable File-Configuration-Debug logging. Restart NIStune. Then perform the operations which caused your problem. Disable debug logging and close down NIStune. Send us the log from the directory C:\Program Files\NIStune\logs directory

Hi Matt, thank you for help, I have logs for you.

NISTUNE LOG May 11 2008 12:58 0.9254
14:56:17.234 CNistuneDoc - usb disconnected
14:56:17.250 CImageSelPanelView
14:56:17.265 ConsultMain()
14:56:17.265 CConsultSM::CConsultSM
14:56:17.265 SetConsultMode(): From 14 to 0
14:56:17.265 CImageSelPanelView
14:56:17.265 CRomulatorSM::CRomulatorSM()
14:56:17.265 RomulatorMain()
14:56:17.265 CImageSelPanelView
14:56:17.265 CRomulatorSM::CRomulatorSM()
14:56:17.265 RomulatorMain()
14:56:17.265 CImageSelPanelView
14:56:17.265 USBMain
14:56:17.265 InitialiseRegisters
14:56:17.265 CNIStuneDoc(): Zeroising target AFR table
14:56:17.265 CNIStuneDoc(): Initilising sensor record table
14:56:17.281 CNIStuneDoc(): Initilising RPM AFR trace table
14:56:17.281 CNIStuneDoc(): Initilising consult
14:56:17.281 ConsultGetActiveSelections()
14:56:17.281 Unable to load afr1.csv lookup table - empty file
14:56:17.281 Unable to load afr2.csv lookup table - empty file
14:56:17.281 Unable to load aux1.csv lookup table - empty file
14:56:17.281 Unable to load aux2.csv lookup table - empty file
14:56:17.281 Unable to load aux3.csv lookup table - empty file
14:56:17.281 Unable to load aux4.csv lookup table - empty file
14:56:17.281 Unable to load aux5.csv lookup table - empty file
14:56:17.281 Unable to load aux6.csv lookup table - empty file
14:56:17.281 CImageSelPanelView
14:56:17.296 CImageSelPanelView::OnInitialUpdate
14:56:17.296 About to create MTS controls...
14:56:17.296 MTS1 Control OCX creation successful within this view
14:56:17.296 MTS2 Control OCX creation successful within this view
14:56:17.296 UpdateAllCombinationLists()
14:56:17.296 Opening C:\Program Files\NIStune\Address\Z31_VG30_256_E_86-89.adr
14:56:17.312 NTLOOKUPID is 21
14:56:17.312 ConsultGetActiveSelections()
14:56:17.312 Unable to load afr1.csv lookup table - empty file
14:56:17.312 Unable to load afr2.csv lookup table - empty file
14:56:17.312 Unable to load aux1.csv lookup table - empty file
14:56:17.312 Unable to load aux2.csv lookup table - empty file
14:56:17.312 Unable to load aux3.csv lookup table - empty file
14:56:17.312 Unable to load aux4.csv lookup table - empty file
14:56:17.312 Unable to load aux5.csv lookup table - empty file
14:56:17.312 Unable to load aux6.csv lookup table - empty file
14:56:17.312 ~CParser
15:03:44.687 CUSBMain: Connecting
15:03:44.859 CUSBDriver:Connect() Number of USB devices: 1
15:03:44.859 0: NIStune USB communications device
15:03:45.343 USBDriver:read: Error got 2 of 10 expected bytes read
15:03:45.359 statusbar: USBConsult connected
15:03:48.296 USBMain: USBDisconnect()
15:03:48.296 CUSBMain(): WaitStopUSBThread: stop USB thread success
15:03:48.296 Disconnected USB driver - handle released
15:03:48.296 CUSBMain(): USBDisconnect: Disconnect successful
15:03:48.296 statusbar: USBDisconnect: USB Disconnected
15:03:50.390 CUSBMain: Connecting
15:03:50.437 CUSBDriver:Connect() Number of USB devices: 1
15:03:50.437 0: NIStune USB communications device
15:03:50.906 USBDriver:read: Error got 2 of 10 expected bytes read
15:03:50.921 statusbar: USBConsult connected
15:03:53.796 USBMain: USBDisconnect()
15:03:53.796 CUSBMain(): WaitStopUSBThread: stop USB thread success
15:03:53.796 Disconnected USB driver - handle released
15:03:53.812 CUSBMain(): USBDisconnect: Disconnect successful
15:03:53.812 statusbar: USBDisconnect: USB Disconnected
15:04:02.953 CUSBMain: Connecting
15:04:02.984 CUSBDriver:Connect() Number of USB devices: 1
15:04:02.984 0: NIStune USB communications device
15:04:03.468 USBDriver:read: Error got 2 of 10 expected bytes read
15:04:03.484 statusbar: USBConsult connected
15:04:05.921 USBMain: USBDisconnect()
15:04:05.921 CUSBMain(): WaitStopUSBThread: stop USB thread success
15:04:05.921 Disconnected USB driver - handle released
15:04:05.937 CUSBMain(): USBDisconnect: Disconnect successful
15:04:05.937 statusbar: USBDisconnect: USB Disconnected
15:04:19.718 CUSBMain: Connecting
15:04:19.750 CUSBDriver:Connect() Number of USB devices: 1
15:04:19.750 0: NIStune USB communications device
15:04:20.000 OnSelUSBConnect(): PIN not supported by this board
15:04:20.265 USBDriver:read: Error got 69 of 85 expected bytes read
15:04:20.265 ReadConsultStream: Read failed (85/69 bytes)
15:04:20.265 TX: CA 02 C0 00 50
15:04:20.265 RX: DA 12 D0 10 50 10 1F 10 10 FF FF FF FF 10 1D 10 1E FF FF FF FF 10 13 10 15 FF FF 10 1C 10 19 FF FF 10 9D 10 17 FF FF FF FF FF FF 10 11 FF FF FF FF 10 51 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
15:04:20.296 statusbar: USB consult error .... retrying 1
15:04:20.296 statusbar: USB consult error .... retrying 1
15:04:24.125 USBMain: USBDisconnect()
15:04:24.125 CUSBMain(): WaitStopUSBThread: stop USB thread success
15:04:24.125 Disconnected USB driver - handle released
15:04:24.125 CUSBMain(): USBDisconnect: Disconnect successful
15:04:24.140 statusbar: USBDisconnect: USB Disconnected
15:04:28.015 CUSBMain: Connecting
15:04:28.046 CUSBDriver:Connect() Number of USB devices: 1
15:04:28.046 0: NIStune USB communications device
15:04:28.281 OnSelUSBConnect(): PIN not supported by this board
15:04:28.562 USBDriver:read: Error got 69 of 85 expected bytes read
15:04:28.562 ReadConsultStream: Read failed (85/69 bytes)
15:04:28.562 TX: CA 02 C0 00 50
15:04:28.562 RX: DA 12 D0 10 50 10 1F 10 10 FF FF FF FF 10 1D 10 1E FF FF FF FF 10 13 10 15 FF FF 10 1C 10 19 FF FF 10 9D 10 17 FF FF FF FF FF FF 10 11 FF FF FF FF 10 51 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
15:04:28.593 statusbar: USB consult error .... retrying 1
15:04:28.593 statusbar: USB consult error .... retrying 1
15:04:29.671 USBMain: USBDisconnect()
15:04:29.671 CUSBMain(): WaitStopUSBThread: stop USB thread success
15:04:29.671 Disconnected USB driver - handle released
15:04:29.671 CUSBMain(): USBDisconnect: Disconnect successful
15:04:29.671 statusbar: USBDisconnect: USB Disconnected
15:04:33.515 OnCloseDocument:: Windows request doc close but windows still open
15:04:33.515 OnCloseDocument:: Windows request doc close but windows still open
15:04:33.562 ~CImageSelPanelView
15:04:33.562 ~CMapTraceDisplay
15:04:33.562 ~ThinChildFrame

What I must fix?

Dont know what is going on there. like its resetting during the data stream. Can you please return the board and email me with your address to send a replacement

PLS check your private message. Thank you.

Replacement board posting tomorrow

New Board is installed in car and working perfetly.



Thank you Matt.