Just wondering does anyone adjust this once they have nistune running, or just adjust k constant, latency and maps?
If not would it be advantageos to put a resistor on the ecu (380ohm from memory) and disconnect afm resistor so if you need to change an afm the setting wouldn't change.
And anyways how exactly does this resistor affect things is it trimming k constant?
Cheers
MAF resistor setting VLT (prob silly question)
Moderator: Matt
If swapping over the AFM we recommend using a 380 ohm resistor in place of the potentiometer built in the AFM. Grounding seems to make it run too rich
I have noticed during my experimentation it seems to be a multiplier having a similar affect to K constant. Havent looked into it too much further than that though
I have noticed during my experimentation it seems to be a multiplier having a similar affect to K constant. Havent looked into it too much further than that though