popping/backfiring on deceleration

Nistune topics specific to the 6802 cpu

Moderator: Matt

Post Reply
Chris86NA2T
 

Posts: 7
Joined: Tue Apr 10, 2007 2:48 pm

popping/backfiring on deceleration

Post by Chris86NA2T »

what causes it and how to i get rid of it? im assuming there is some fuel getting into the exhaust when i let off the gas. basically when im in gear and totally off the gas i get some loud popping and backfires through the exhaust. are there changes i can make to the fuel cut or fuel recover tables? is there a mechanical problem?

the car is intercooled, hybrid turbo, dsm 450cc injectors, z32afm, vg33. i never noticed it until i removed a second muffler that i had in place of the converter. now i just have a straight 3 inch turbo back exhaust and a magnaflow muffler in the back. the car runs fine otherwise, but its kind of annoying and id like to get rid of it if possible. please give me some ideas of some things to check
1SIKZ31
 

Posts: 79
Joined: Thu May 24, 2007 4:15 pm
Location: Dallas, TX

Post by 1SIKZ31 »

What k value and Latency are you using???



You need to mess with the Fuel Recover/Fuel Cut Tables... thats what causes the popping...

It occurs when the ECU recieves a TPS "on" signal, it will access the fuel recovery and cut tables, as well as the Idle timing table.


Good luck.

Chris you should give me a copy of your tune for me to look over.
In the Works:
Z32 MAF
Holset HX35W
Custom 3 Inch Downpipe
AEM UEGO Wideband

Shooting for 400rwhp on the stock Longblock
9:1CR
Matt
Site Admin
 

Posts: 8993
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

as he said... fuel cut/recover tables

You are getting unburnt fuel going through and being ignited afterwards. Especially noticable if you dont have a catylitic converter or any other restrictions in the way
Alrick
 

Posts: 20
Joined: Wed Mar 12, 2008 6:37 am
Location: Netherlands
Contact:

Post by Alrick »

I have that same popping and backfiring happening...

dont find it that annoying but i think the cops do.. lol

in order to avoid leaning out or doing something wrong...
should u raise those values in the fuel recover/fuel cut tables or lower them ?
Buddyworm
 

Posts: 37
Joined: Tue Mar 18, 2008 10:53 am

Post by Buddyworm »

Man I love that popping and burbling on the overrun, I have no idea why you'd want to get rid of it. In my opinion it's one of the few perks of free-breathing exhausts, unlike the incessant drone at highway speeds.
Post Reply