Page 1 of 1
z32 maf on ca18det NON LAMBDA
Posted: Wed Nov 26, 2008 7:50 pm
by ar99kid
i have a z32 maf (n62) and want to put it on the ca18det. the problem is that i didn't find the wiring for a non lambda setup maf has 4 wires...
anyone have an ideea ?
thanks
Posted: Sat Nov 29, 2008 7:31 am
by streetbike
s13 non lambda has 4 wires but only 3 are used....
juste wire the +12v, ground and signal.
Posted: Sat Nov 29, 2008 9:17 pm
by ar99kid
hey again
it-s you again helping me
i have found the wiring for this maf
so for anyone interested with same set up for a ca18det without lambda :
the maf has 4 wires like this
green/black.......signal from maf (0-5v)
black/white........12v from source (car)
black.................ground(from car)
green/yelow.......leave it free (it doesn't metter anymore)
and the wiring for the z32 maf is like this:
green/black......B pin
black/white.......E pin
black...............C pin