Nistune Forums

Posted: **Thu Jan 15, 2009 8:07 pm**

Hi!

If I change the injectors from 370ccm to 550ccm in a SR20DET-Bin must I change the injector value in the adress-file too to match the new injector size or can I leave the entry "INJECTORCC=370" as it is?

This is one thing I do not found in the manuals.

Greets
Michael

Posted: **Mon Jan 19, 2009 11:50 pm**

there is no need... it is only used for the 'factory' CC when used in the injector resize box as a starting value

Posted: **Tue Jan 20, 2009 12:57 am**

Thats fine.
In ECUTalk it is essential to type in the correct injector size because this value will be used for calculating the fuel consumption (which is pretty close to the real fuel consumption).

Posted: **Tue Jan 20, 2009 12:52 pm**

when i add in the fuel consumption code in the future, it may be necessary to adjust this then... or have just another entry in the File - Configuration window (calibration section) for this instead

Nistune Forums

Adjust Adress File

Adjust Adress File