Page 1 of 1
Injector Duty Cycle not reading... S13 KA24de-t
Posted: Mon Apr 06, 2009 4:11 am
by Caspers_240
I would like to be able to log the duty cycle on my 91' S13 KA24de-t but the reading just stays at 0. Am I missing something?
Injectors are stock 370's out of an SR, so I know I'm limited W/ stock FPR and a T28...
Thanks guys!
Posted: Tue Apr 07, 2009 2:41 pm
by Caspers_240
anybody?
Posted: Wed Apr 08, 2009 2:29 am
by Matt
im seeing it here on log playback (ER34). looking into it
Posted: Thu Apr 16, 2009 9:40 pm
by chris2712au
check that you have the correct flags enabled.. it was the same for my s15 and I had to enable it in the flags for the consult registers as it isnt a default setting
Posted: Thu Apr 16, 2009 11:10 pm
by Matt
i was looking at that file again and found it was used.
thanks chris... didnt think about the drop down list
let us know if it is okay once you select it in the guages list
Posted: Sat Apr 18, 2009 7:57 pm
by Matt
Operations - Select Display Guages - Tick 'Injector duty'
I've closed this one out since its just a tickbox thing