Nistune Forums

Well, finally got to the bottom of this. Just been messing around abit more and while not connected to the car. I've chose the B13 91-92 ADR, then chose one of those .Bins and wah lah! All values and maps. :D So I might not be able to load the bins because of the ecu differences, but atleast I can v...

So when you check the comparison there are differences - after doing the copy on the maps you have selected?? Thats odd. You will need to burn those changes after doing the copy. That copy feature is the only thing which doesnt upload the changes to the board real time (everything else including cu...

Ok just another quick question, I'm trying to load a base VE map onto my ECU to give me a better start to tune from. I've followed the guide in this thread on SR20-Forum. http://www.sr20-forum.com/tuning/24693-whats-wrong-nistune-10.html When I get to the point of 'copy all' once I've clicked 'from ...

Fusion Ed wrote:Flat is often good, not bad. I mapped a SR20VE today. Ed

I know you do this for a living and will fully understand if you say no, but I don't suppose you have the Ign map from that SR20VE to hand do you? Or afew pointers of what degree it was at certain points, for me to use as a guide?

Cheers

Nice one, cheers.

Well I used PCB cleaner on the MAF and cleaned inside the TB, and it's settled to around 1000prm....Which is ok for now. Maybe the butterfly wasn't closing properley. I've re-sized the injectors and the AFR's are pretty good. 14.5-9 on idle to high 12.8-13.2 on WOT. It needs more work there though, ...

Thanks for the reply, It's showing 15*....I wanted to knock it back abit to see if that brought the idle down, and to prevent det while I run the engine in.

I'll have a look at the target rpm, thanks.

Hi, I've had my Nistune board for afew months now but only just finished off the engine conversion....so I'm now ready to get to grips with the software. The car is a Almera GTi with a SR20VE engine. Matt uploaded my old SR20DE tune for me when he fitted the board, and there's afew basic things I'm ...