Search found 17 matches

by Crazy
Sun Nov 15, 2015 2:01 pm
Forum: Type 1
Topic: Intermittent issues
Replies: 13
Views: 5139

Re: Intermittent issues

Matt, I found the problem. I just kept replacing parts till I found the problem. The z32 MAF only wanted to work half of the time then died completely.....I got a used factory stock z32 MAF on ebay and the car runs great!
by Crazy
Mon Sep 28, 2015 1:16 pm
Forum: Type 1
Topic: Intermittent issues
Replies: 13
Views: 5139

Re: Intermittent issues

Yeah I don't think its an ECU problem... something else has gone wrong I installed the Nistune ecu in my stock Nissan 300zx 86 turbo with the correct image and the car runs great! On the problem car I changed the coil, dizzy, new cap, rotor, wires. next is new CHTS and CTS I just ordered from Nissa...
by Crazy
Mon Sep 28, 2015 12:00 am
Forum: Type 1
Topic: Intermittent issues
Replies: 13
Views: 5139

Re: Intermittent issues

The car stopped running good at all now. It runs bad all the time! I had a popsicle stick under the throttle blade adjustment to do the log because it runs so bad. I did buy a new board from Andy and installed and nothing changed! I will install the ecu in my stock Nissan 300zx 86 turbo and do a few...
by Crazy
Fri Sep 25, 2015 12:09 pm
Forum: Type 1
Topic: Intermittent issues
Replies: 13
Views: 5139

Re: Intermittent issues

I took a log. I didn't get the LM1 hooked up.
by Crazy
Mon Sep 21, 2015 2:05 pm
Forum: Type 1
Topic: Intermittent issues
Replies: 13
Views: 5139

Re: Intermittent issues

What do i log along with the wide band AFR, RPM, & water temp?
What is cylinder temp sensor listed under?
by Crazy
Sat Sep 19, 2015 1:42 pm
Forum: Type 1
Topic: Intermittent issues
Replies: 13
Views: 5139

Intermittent issues

1986 nisan 300zx turbo with a nistune converted 88 non turbo ECU......Car runs good just sitting idling , then all of a sudden the engine shuts off. I figured out when it dies it went extremely rich. Nistune was not connected to the ECU for two years (the car ran 12.40s @ 114mph in the 1/4 mile on t...
by Crazy
Tue Oct 04, 2011 11:48 am
Forum: Type 1
Topic: Matt, what is going on with this tune???
Replies: 0
Views: 17539

Matt, what is going on with this tune???

The car shakes under boost. Im not sure what to do.
by Crazy
Sun Sep 11, 2011 4:50 am
Forum: Type 1
Topic: How does this log look?
Replies: 2
Views: 1799

Re: How does this log look?

The spark plugs look good. I even installed new ones....... dident fix it. I fugured out what the curser was hitting the end of the fuel load scale. The car runs good now.
by Crazy
Wed Aug 31, 2011 1:38 pm
Forum: Type 1
Topic: How does this log look?
Replies: 2
Views: 1799

How does this log look?

Why is my AFR so rough?
by Crazy
Sun Mar 08, 2009 8:03 am
Forum: Type 1
Topic: USB Device not recognized
Replies: 10
Views: 4273

The replacement usb to board plug-in fixed the "unknowen USB device" problem and allowed me to install the drivers. :D
by Crazy
Sun Mar 08, 2009 7:59 am
Forum: Type 1
Topic: USB Device not recognized
Replies: 10
Views: 4273

The replacement usb to board plug-in was one problem.
by Crazy
Thu Feb 19, 2009 12:04 pm
Forum: Type 1
Topic: USB Device not recognized
Replies: 10
Views: 4273

I just installed the current update and bought a new usb cable, no change :x
by Crazy
Thu Feb 19, 2009 12:40 am
Forum: Type 1
Topic: USB Device not recognized
Replies: 10
Views: 4273

I cant get past "cannot continue the hardware update wizard"
by Crazy
Wed Feb 18, 2009 3:58 pm
Forum: Type 1
Topic: USB Device not recognized
Replies: 10
Views: 4273

The only change i made is going from a 85 turbo ECU to a 88 ECU with nistune. I did the dropping resistors and the injector rewire. After i had the board installed i plugged in the ecu and started the car and it immediately flooded itself. :x Is there a ROM image in the ECU, or do i need to load one?
by Crazy
Wed Feb 18, 2009 3:50 pm
Forum: Type 1
Topic: USB Device not recognized
Replies: 10
Views: 4273

I can't get the drivers to install. windows XP
I worked 4 hours on it, still no install.