Nistune Forums

Matt wrote:not sure on that one. I'll check it out on my next run just in case km/h is wrong

I just tried 174km/h which converted to 108mph once I adjusted it which is correct

I've got about 30 min of logs with 10.06 that say I never got faster then 30mph.
That's impossible where I live.

I've gotten it alittle better. I still have a lean spot in the vacuum to boost transition. Check out the pic, that spike on the lower red line is right where -psi crosses over to +psi. t right.jpg I've attached my tune. Could someone please take a look at it and see if maybe I'm missing something. A...

Running 10.06
Speed isn't correct for my ECU
US KA 240SX
I have it set to MPH. I know I was going faster then 29mph

No one has any ideas for me.
I'm lost.

Anyone have any tips for tap in throttle and boost transition. US 240sx ka24de-t Type 3 board T3 850cc Z32 hitting WOT and as I'm building boost fuel seems to be late to the party. I'm at 6-7+psi and running 13.8 afr when in the fuel cell it's 11.0. Finally it rockets down and measures about the sam...

Techedge is serial communications (RS232). What issues are you having with Innovate (apart from the look up tables?). These appear to be more accurate than the Techedge according to Pete. Zeitronix gauge looks like a feature packed wideband +1 for Zeitronix Logging boost makes tuning alot easier fo...

Looking at a stock bin for a US KA24DE 240sx. In the fuel map Nissan runs a target afr of 15.52 in a cell (Low TP and low RPM) with the O2 flag activated. My understanding is the O2 flag will always try to stay at an afr of 14.7. Why even bother putting in 15.52 when the O2 flag is going to try to p...

Keep an eye on the General Nistune Discussions forum. There's a Thread Nistune 0.10 release.
I've noted this problem and I'm hoping Matt's working on it.
In the mean time I'm using software version 0.9.14.22 that you can download from nistune's site.

There is a new version that address this problem.

Update your software to 0.10.4

Next problem is when the log is recording I can click in the drop down box to view my Zeitronic readings. Wideband a/f and boost readings during recording.jpg But when i recall the log and review it I can't view anything from my wideband. during playback.jpg Is this a SW problem or am I doing someth...

Ok I'm running 0.10.04 on a US 240sx with a KA motor type 3 board Window 7 64bit I'm having lots of problems with logs. First During playback none of the values show up correctly. TP during play back.jpg But if you click on the graph the values change alot and appears to show the correct value TP wh...