consult log view playback issue

[Apollo8642]

I go to playback my log, hit play, and it starts and immediately stops. There is no continual play back, am i doing something wrong here?

thanks,
Nick

[Matt]

how long is the log file? short log file will not play. if its a longer one then post it here and I can check it

[Apollo8642]

how long do they need to be, most of the logs I've been doing are no larger then 30kb?

Also is there away to way to change the table on my maps to so show rpm up to 8000 instead of 6400?

thanks
Nick

[ST240]

how long do they need to be, most of the logs I've been doing are no larger then 30kb?

Also is there away to way to change the table on my maps to so show rpm up to 8000 instead of 6400?

thanks
Nick

Yes. Use the RPM scaling tables to scale it to whatever you want. Theres one for ignition and one for fuel. Look for them on left hand side.

[Apollo8642]

Kick ass, thank you very much that helps my scaling issue!

[Matt]

longer than a sceeen length before they will scroll on playback

[kenbam]

Matt.
Version 0.9.14.13.

On playback, it doesnt show actually A/F and aux1 (MAP) from my techedge.

Its all there on the graph, and if i click to go through 1 frame at a time it displays ok, on normal playback though it shows 0.00 for MAP and 9.00 AFR.

Figures are all there in the log CSV file, just wont playback in normal time.

Any ideas?

[Matt]

Hi Ken

Can you post/email me the log file? Not sure about that one so will need to play it here

[kenbam]

Ill take another log tomorrow, it happens with all of them.
But as i stated earlier, the info is all in the CSV file, and going through the log replay, if you go through frame by frame its ok.

Ill send one tomorrow.

Thanks Matt

[kenbam]

Matt.

Attached is the log file, the aux1 csv file for the map sensor, techedge2 folder, and the bin file.

I tried moving the techedge folder else where and pointing the configuration (in nistune) path to the new location, just incase it was the same windows 7 prob of not displaying files all the time.

The only traces that are affected are the ones coming in from my techedge controller, so i though it may have had something to do with the techedge folder but it was the same deal. Traces are all over the place in playback, are ok in the csv file and display ok if you go through playback one frame at a time.

Thank

NIStune_2010-09-22_0635_32.csv

(782.75 KiB) Downloaded 259 times

aux1.csv

(100 Bytes) Downloaded 284 times

c34801.bin

(64 KiB) Downloaded 274 times

[Apollo8642]

I have been out at a drift event all weekend and havent had a chance to play with this issue, looks like I'm still having it.

I tried to attach a *.csv file to this post and it show that I have no logs in my log fold wihich I have about 15 of them but I can access them in Nistune. I can't find them if I go to my computer and view the file either.
I made sure in cofiguration that the log files were going to the right place and everything seems right, so any ideas?

thanks

[kenbam]

Hi Nick, sorry to hijack your post, but i thought you were done, didnt want to start another on the same topic.

Are you using windows 7, i was having the same problem, it hides them. Try doing a search on *.csv and they will show up.

Then just move them, i have changed the default folder to a folder i made in documents, seems to work ok then.

[Matt]

File-configuration

Change log folder to outside C:\Program files like C:\mydata\logs

[Apollo8642]

No worries about the jacking

thanks for all the help I'm going to give that a try, not to thrilled with windows 7

[Matt]

Ken - looking into it. Something doesnt seem right with the wideband translation