S130 with L28E engine - what ECU and harness to use?

[skylinegtrhr]

Hi,
I have one question regarding S130 280ZX with malfunction ECU (22611 P8600, A11-000 428, 0624 L28MT).

Did anyone use this engine and some ECU which have NIStune support ?

We would appreciated any experience with L28E or if some one have this ECU for sell please let me know
Regards

[Bernardd]

If you can find a turbo oil pump/distributer drive you have a few options. You can swap a turbo cas disk with a z31 cas disk and a z31 ecu. You can also wire in a m30 ecu and have a consult port and sequential injection and lastly you could swap a z32 cas into the turbo cas housing and use any size cylinder ecu. I used a j30/maxima cas on mine and it worked out very well with 670cc injectors and coilpacks. With the cas I used I had to offset the pump by one tooth to get the timing right and had to install a throttle body with the variable tps (ka24de). I'm moving to another engine setup so I won't be using mine anymore if you're interested.

[skylinegtrhr]

Thanks for answer I'll contact You on PM