Version 0.10.14
Fixed bugs:
50F00 write error on low afm volt. Dislays as 0
Knock map read error
Alert when wideband file/s not found
Translation file browse needs to change to file rather than directory browse
Make table grids remember their position again
Colouring changes
Z32 ECU not reporting VTC (Digital control registers 2/3) in ram trace mode
Flags highlighted in comparison
Speed trial panel times out
Tooltips for filenames broken
MAF changes. Updated MAFs, address files and ROM pack
PIN cancel on type 1 still set pin. Fixed various pin issues
Map highlighting not working in step by step playback
Knock map highlighting only works in live mode (same with knock panel)
Fix auto display consult view and consult gauges window
Enhancements:
Internal software restructure of classes
Translation updates. Incorporate unicode
Recently used file list
VTC map highlighting
Extra boost control maps pt1
Add N1 VQ map
Beep when switching to knock maps
Percentage change and right click context sensitive changes
Comparison colours
Right click copy select to comparison
Log header to include time
Cells in delta more visible
Map trace reset from window
Main points:
The main things you will notice is that the menu systems are reorganised and some items which were duplicated with icons are removed (emulator upload/download are combined with sync)
Sync is now a single click operation and sounds on complete
Right click on grids and tables to adjust view/display options instead of previous tick boxes as well as copy/cut/paste facilities
Translation updates have been completed throughout the code. This means that all text can now be replaced with foreign characters. However this is dependent on your 'code page' which is how windows natively displays text on your windows installation for your region. Nistune updates towards UNICODE have been completed for most of the part but there are problems during execution for reading address files, log files etc due to the replacement of 2 characters for every 1 which UNICODE requires
Logging changes have been done to try and sync the cursor up but more work still required. It will load previously saved files on load up or after disconnecting consult.
Previously it has been mentioned that the usage of counterfeit Prolific USB-serial converters (available on ebay) were having problems with the 0.10 releases of Nistune. This is because they are a poor copy of the 'real' prolific chipset and required specific drivers just to function okay. Previously software problems with this driver were fixed by allowing a '0' time delay during the scan process. However I have found during testing that the hardware is rubbish and continuously disconnects my Innovate wideband, requiring full disconnect/reconnect of both Innovate as well as the converter, then rescanning the ports (rescan button added in File > Config). Replacing the converter with my Aten USB-serial converter (real prolific U232A chipset) showed no disconnects, delays during scan or other hardware issues with Innovates LC-1 unit)
Please post any issues with this particular build to this thread.
Attached to this post is a list of current known bugs and peoples requested enhancements. There are more not currently on this list which have been directly emailed to me. Now this interim build is available I will update that list accordingly and work on the next highest priority issues
People requesting enhancements, firmware updates etc must realise that application fixes take priority over improvements to the software, then next are high priority improvements etc. I also list investigation items which are for things which require a minimum of several hours of time to investigate things further as required by customers
