did I break it?

[maglito]

I was trying to tweak the injector multiplier on my Z with the type 3 board. Nothing seemed to be happening when I would tweak it up or down, so I entered an absurdly large injector multiplier and hit the "apply" button. The engine immediately died, and won't restart, even after returning the injector multiplier to it's original state.

Is it possible to damage the ECU with Nistune if I set a value wrong?

Please help!

Thanks

[CoZZm0]

You probably flooded the motor would be my guess.

When you're tweaking the injector multiplier, you should tick the "auto" box which will apply the changes as you make them.

[maglito]

I installed a different ECU and it fired right up...so it isn't flooded. I'll retry the original ECU and see what happens...

Thanks