hi guys,
i recently bought a s13 sr20det blacktop for drifting and i would love some help tuning it. still trying to learn the programs and everything. i do have couple issues with the car, 1. the afr is running rich sitting about 13 when idling and 2. after reving the car the rpms drop and the car stalls out. can anybody help?
thanks
here is most or all of the mods
cp pistons eagle rods
acl race bearings, new thrust washers
new oil squirter
Cometic head gasket
arp head studs
Rocker Arm stoppers
Spec stage 4 clutch kit
Lightweight flywheel by fidanza
arp flywheel bolts
nismo FPR with gauge
300zx fuel filter
t3/t4 top mount turbo manifold
38mm tial wastegate
50mm tial BOV
Custom intercooler setup
Custom exhaust with silencer
550cc injectors
stand alone ECU (nistune)
300zx Maf
custom piping setup
quick release steering wheel
Bride Racing seat
Cobalt boost guage
Aem Wideband
greddy boost controler with 3 step setup,
battery reloaction
big rad with dual fans
300zx front brakes
new brake booster and master
steal braided lines on the clutch and brakes
megan coilovers
fno 17x9 rims
5lug conversion
circuit sports tension rods
Weld diff
Hid custom setup
s13 sr20det blacktop
Moderator: Matt
Re: s13 sr20det blacktop
change the "weld diff" ... if it makes any power you'll end up in a wall.
as for tuning, a good start is a flat fuel & ignition map after 3000rpm.
post, bin file, address file and data log and we might have a chance to see where things are going pear shaped.
The MAF or VQ table is the most likely cause.
else it could be the brake booster valve or
Lightweight flywheel by fidanza
nismo FPR with gauge
50mm tial BOV
Custom intercooler setup
550cc injectors
300zx Maf
custom piping setup
battery reloaction
big rad with dual fans
as for tuning, a good start is a flat fuel & ignition map after 3000rpm.
post, bin file, address file and data log and we might have a chance to see where things are going pear shaped.
The MAF or VQ table is the most likely cause.
else it could be the brake booster valve or
Lightweight flywheel by fidanza
nismo FPR with gauge
50mm tial BOV
Custom intercooler setup
550cc injectors
300zx Maf
custom piping setup
battery reloaction
big rad with dual fans
Re: s13 sr20det blacktop
This may help you or not. It is intended for an 86mm bore, 550cc injectors, z32 afm, stock camshafts, and do not boost above 14psi on this... warning
- Attachments
-
- 86mm 550cc no cams z32afm.bin
- (32 KiB) Downloaded 472 times