Speed Trial Function not stopping

[my1path]

Running an M30 ECU and my Speed Trial function does not stop.
Consult displays my current speed and the Speed Trial Clock starts just fine on both RPM and speed triggers but it does not Stop when I reach my desired "Time to reach" speed.
Also, can we have the option added to have it stop at set RPM?

[Matt]

Raised issue:
http://www.nistune.com/mantis/view.php?id=19

[my1path]

Raised issue:
http://www.nistune.com/mantis/view.php?id=19

Thanks, looking forward to this working. I do not have access to a dyno and I do not have a reliable co-driver with a stopwatch.

[my1path]

I just installed 1.2.41 and Speed Trial now works. Thankyou for fixing this and thank you for incorporating the change I recommended to allow selectable stop functions similar to the selectable start functions.
I now feel like I can take my tune a lot farther without a co-driver and without a dyno while still being safe behind the wheel.
Here was a test run I did today "1-60" sorry for the blurry pic. (all tuning will now be clocked in a single gear with timed 1000 rpm pulls)

[Matt]

Sorry it was broken in the first place! It was some stupid error causing it not to work. I did the enhancement whilst I was in that area of code

You can screenshot using ALT-PRINTSCN also