Type-2 board
Car - BNR32 RB26
Laptop - Lenovo X1 / Windows 10 Pro
Wideband - Innonvate LM-2
Nistune and LM-2 are connected to laptop with their own USB ports.
When Auto AFR window or AFR grapher is open, wideband reading will freeze in Nistune, but it's still reporting "wideband connected".
If I click "disconnect" button, the message "Disconnecting from wideband....." stays and won't go away.
I have to restart Nistune for wideband to work again.
Other functions work properly such as Input tracer , data logging....etc without issues.
Only when I open Auto AFR or AFR grapher, wideband stops working.
Wideband itself on LM-2 handheld is functioning properly.
Auto AFR bug - wideband freeze when Auto AFR is open
Moderator: Matt
Re: Auto AFR bug - wideband freeze when Auto AFR is open
Managed to identify the issue (caused by array overrun in 1.2.88 version). Will put a release out today
Re: Auto AFR bug - wideband freeze when Auto AFR is open
Great! Will test it out
Thanks Matt for the quick action
Thanks Matt for the quick action
-
- Posts: 10
- Joined: Sun Sep 02, 2018 4:30 am
- Location: Miami, FL
Re: Auto AFR bug - wideband freeze when Auto AFR is open
I have the same exact same issue for the
Type 1 board
Z31
LC-1 wideband
Should the fix also apply to the type 1 board?
Thanks
Juan
Type 1 board
Z31
LC-1 wideband
Should the fix also apply to the type 1 board?
Thanks
Juan
Re: Auto AFR bug - wideband freeze when Auto AFR is open
Yes its already fixed in the 1.2.103 version.
-
- Posts: 10
- Joined: Sun Sep 02, 2018 4:30 am
- Location: Miami, FL
Re: Auto AFR bug - wideband freeze when Auto AFR is open
Thank you Matt