Missing values / sources

[Shaker]

Hello.

I updated from 1.3.21 to 1.3.24 and have the problem, that some live values are not available anymore. After recording a log, I noticed that TP load Index wasn't logged. Some other values are also missing. I attached some screenshots. They are missing in the gauges selection as well.

Can somebody tell me, what went wrong? And how can I fix this?

I removed nistune and its feature/rom packs, intalled it again, but still have this problem.

[Matt]

Okay will have a look into this, the TP load index and duty % are calculated parameters

[Shaker]

Thanks,
one more information: When I downgraded to .21 without improvement. The TP load index is gone. Even applying a recovery of the Windows partition (with nistune installed) didn't help. I must say, that the user folder of nistune was not touched by this, since it's on a different partition.
After this I did an uninstall and reinstall of .24. No success. I haven't checked or cleaned the registry values here.

[Matt]

Will put up a fix this weekend once I've checked it here on an ECU. Sorry its been a really busy week

[Matt]

Version 1.3.25 going up tonight

[Shaker]

Strange. It worked once with .21 but on a fresh install (new OS, fresh nistune installation) it didn't with the same .21 version.

But you made it work again with version .25, thank you for this awesome quick fix!

[Matt]

No probs. Sorry I broke it

I've removed some of the parameters which are not available in stream mode so they don't log, but it affected other things

[cmsperformance]

i only just updated today and noticed the same thing tuning an R31. I just restarted Nistune and the Trace & TP Index came back

[Matt]

Yeah it would have affected all Type 1 boards (and previously stream mode in the few versions before hand). I should have that all solid now so an upgrade recommendation is made on starting to use 1.3.25

[Shaker]

Yeah it would have affected all Type 1 boards (and previously stream mode in the few versions before hand). I should have that all solid now so an upgrade recommendation is made on starting to use 1.3.25

Oh, maybe that's why downgrading and a fresh installation didn't help in my case. I had accidentally switched to Steaming mode instead of Tuning mode? It doesn't make a difference for Type1 boards, as far as I know, that's why I usually don't pay attention to this button.