Whatever formula that displays the primary fuel map in units of target air/fuel ratio is wrong. A raw value of 128 is displaying a target air/fuel value of 29.4 where I believe it should be showing 14.7.
Also in the base SR20_KA24_512 file, the addresses for TTP min and max are reversed. TTPMax is E3A0, TTPMin is E390....unless that is how they need to be for the SR20.
Lucky I still have a modified address file from the 1.4.2 release that displays the map correctly.
S14 KA24DE address file
Moderator: Matt
-
- Posts: 9
- Joined: Sat Nov 15, 2008 3:24 am
- Location: Edgerton Wi.
-
- Posts: 9
- Joined: Sat Nov 15, 2008 3:24 am
- Location: Edgerton Wi.
when I moved the VE flags this one got missed
need to add to the address file
VE_FUELMAP_FLAG=1
yes the maps in the base file are the wrong way for this one. I've switched them over. thanks for pointing these out
I've updated the files here (attached). Please put in your address file folder
need to add to the address file
VE_FUELMAP_FLAG=1
yes the maps in the base file are the wrong way for this one. I've switched them over. thanks for pointing these out
I've updated the files here (attached). Please put in your address file folder
- Attachments
-
- S14_KA24DE_512_E.adr
- updated S14 address file
- (850 Bytes) Downloaded 186 times
-
- S14_KA24DE_512_E.adr
- updated base file
- (850 Bytes) Downloaded 232 times