0.9.13.2 available

Matt · Post by **Matt** » Sun Sep 06, 2009 7:13 pm

this is another in the line of beta versions

- I've started adding map determination highlight (pink indication) for other maps using the starter, neutral, TPS and aircond switches. It is only just started and I need to add more checking in (ie temperature) but should help all of us work out which maps the ECU is using at any time. I repeat... it is not finished or tested!

- Innovate SDK for Logworks 3.0 is confirmed tested and working now. Previous 0.9.13 versions froze/crashed on connection. I've also enabled dual (linked) units to report as LHS / RHS again. Let me know how it goes... I've only got one LC-1 here to test with

- Fuel maps/timing maps are resizeable but the fonts arent yet. For the sake of not breaking it any further I've left them as default size until I get resized fonts looking nicer than they did during my testing. Should be fixed in a near release soon

- Z31/R31/VLT have injection time reported showing up now and also parameters used for determining when idle timing table is used. This should now assist with timing pull issues during cold start. Temp seems to be 70 degC on R31/VLT but Z31 reports this as 255... not sure why here but try adjusting the parameter to a lower temp and let me know how it goes. the firmware code looks the same

- Currently investigating S13 CA18 cold start timing. I've got the disassembly worked out and just need to go through and test the timing tables and parameters do what I think before more address file updates

- Changes to fuel autotuner : Now require 'space' to mark cells which you wish to enable feedback on. This will mark the cells used .. but it makes the display colours look a bit out of it. I might make the cells not tuned 'grey' and to be tuned in standard colour for the next build

Overview so far of 0.9.13* releases which are completed

- Add warning if MAF resize overflows
- Fix S13 CA18DET address file
- Grey out buttons (knock / gear) copy if not available
- Include Innovate LC-2 Logworks 3.0 SDK in install pack
- Innovate second port when first one used
- Log player zoom in/out not staying on current focus
- Remove old address file during installation
- S13 KA24E neutral / TPS idle are incorrectly reporting
- Adjusting timing in filtered with +/- does not work properly
- Close log grid window first during logging crashes log player
- Innovate log crash, innovate 2 wideband units (AFRs for linked)
- Grey out unused fields

TM_S13 · Post by **TM_S13** » Sun Sep 06, 2009 8:17 pm

thanks Matt,
gonna try and see how it behaves on the general stuff I do untill I get the wideband.

Matt · Post by **Matt** » Sun Sep 06, 2009 10:30 pm

Fuel map grid is broken in this build... I just found it then. You cant change the fuel/timing maps. I've done the fix now and just checking some emulator stuff and then 0.9.13.3 will have to go up very soon...

Matt · Post by **Matt** » Sun Sep 06, 2009 11:33 pm

uploading now

TM_S13 · Post by **TM_S13** » Mon Sep 07, 2009 12:18 am

didn't had a chance to try it yet...
thanks for noticing that

MichaS14a · Post by **MichaS14a** » Mon Sep 07, 2009 5:10 am

Hey, thank you!
I will test the 0.9.13.3 on my 800x600 CarPC-screen.

EDIT: Cool! It runs under 800x600!!!

Here is a screenshot from a fuelmap under 800x600:

Matt · Post by **Matt** » Mon Sep 07, 2009 8:28 am

yeah just need to make those font sizes scale up without looking crap or chopping the end of the number off