Nistune 0.9.13.12b Release

[Matt]

0.9.13.12b fixes the following

- Rev limiter investigation
- LM-2 still not working (COM port not found)
- Active test not clearing as expected
- Imperial ticked affects WB values
- Imperial ticked, records imperial and on playback messes up output. Record as raw

[TM_S13]

I'll test what I can, as soon as I can... I've been kinda busy lately :S

[bj226]

Dear Matt,

I updated to the latest version 0.9.13.12b recently and found that it's imposible to adjust the injector multipler, latency, O2 feedback temp etc. while the Wideband display is running now. If I close the wideband display, everything's fine!

It used to permit the above operations in the previous versions and it is now impossibe to make the adjustment when monitoring the wideband reading.

For your information, I am using a type 2 board of BNR32 on a BCNR33 with a Zeitronix wideband unit.

[Matt]

thanks. i'll have a look at it. strange problem

[bj226]

thanks. i'll have a look at it. strange problem

Matt, it works fine now... I used to click the empty cells (i.e. the injector multiplier, o2 feedback temp etc.) and make the adjustment directly.. while now, I must click the up or down arrows next to the cells instead. Strange but no big deal!!!

Sorry for the silly question!

[Matt]

Okay for the wideband one - Untick 'Wideband on top' in File-Configuration

Its continously refreshing on the updates and moving focus away. I'll have another look into how I can work around this whilst still keeping the feature in somehow