Dataloglab

[Fordy]

Anyone else using this with nistune?

[Matt]

http://www.dataloglab.com/

does it work? we are not listed on there (NissanDataScan is)

[Candellan]

I use it with my PowerFC/Datalogit data & it's a good tool to have. I haven't tried it with NIStune/etc yet.

[Fordy]

http://www.dataloglab.com/

does it work? we are not listed on there (NissanDataScan is)

works perfectly matt i made a defination file to make our nistune logs work with it

only thing is to get our logs in the right format, you have to open the log with excel then save as a .txt file then its all ok and good to go

the power graph tool is great for benchmarking against

[Mads B (dk)]

please upload your definition fil

[Fordy]

ok here it is guys

copy the attached file to :
DataLogLab/Universal Data Log Formats

then all you need to do is change the look up for logs

the tricky bit now:

to get our nistune logs into the right format for dataloglab to read it we need to convert it from word wrap to columns

to do so do you to do the following
find your nistune log and open in excel
click save as and change the file format type
from .csv to .txt
this puts the log into a txt document in columns so dataloglab will view it correctly with the attached file

hope this comes in handy

[streetbike]

Can you give us an exemple of nistune file in .txt that works please ? when I try to open mine after editing to .txt , that don't want to work ..

here is mine :
thank you.

[Fordy]

streetbike that txt file is comepletly different to how mine come out so i dont know what you done there

i'll do a little how to

[Fordy]

Go to nistune logs


Right click log file you want to see in dataloglab and click open with excel


Should have this screen


Click save as in excel


Should get this screen


Change save as type to .txt (ms-dos)


You may get this option if so click yes

Exit excel and click no to save changes or it may mess up the log file

You should see the .txt file


Now open Dataloglab and open the .txt file


Click Draw and your log file with be shown


thats all you need to do to get it working

[martinbattye]

time for a credit. dont you think Mr Ford??

[Fordy]

yes indeed, martin is the bloke that showed me dataloglab and got the def file working

altho i've noticed it needs adjusting as the logs are coming out different on the new version 9.14

[martinbattye]

Thanks thumbs up..

[Fordy]

i've just fixed the definition file for the version 9.14 onwards as the logs are coming out with a extra line before the data

[blu3man]

When I do my datalog runs. The estimated power graph does not mention my speed at the bottom (even through speed is in the logs and shown on the main graph).

Also my power figures seem pretty damn high.

what am I doing wrong?

Pics:

[Fordy]

are your logs done in tuner mode or streaming? streaming gets much better accuracy logs

seems yours is working ok tho you dont get speed figure on the power graph

if you click tools and speed graph that'll give you a speed vs time figure