Nistune Forums

hey guys, first post and stuff.

Got my nistune installed into my ecu and running, havn't done any tuning bar some ign changes due to awaiting arrival on my wideband.

Anyways, heres my problem.

It seems that something passed or before the ecu is burning something out in my ecu! It doesn't have effect on running of the car( It was damaged before the nistune board was installed)

The terminal number or what ever it is, is t370.

Anyone know what this does?


Thanks.
Waz.

can you post a pic of it?

hey Matt.

Ive attached a picture below. The short is located 2thirds accross near the bottom.

near the injector drivers, but without tracing not exactly sure what its for. a driver transistor of sorts. could be an output driver for something which isnt currently stopping car running (even check engine light)

G'day Waz. Brad here. Trace the track back. It looks like it heads to the loom socket. Do you have a multi meter? If it does go to the loom find the pinout and cross reference. It's possible there is a short or dodgy sensor hooked up. Worst case give me a buzz 0406382364 and we can work it out at pizza night. Cheers