i am running a ka24de-t setup as follows, walbro 255 holset h1c turbo SARD 850cc sidefeed injectors stock fpr Z32 MAFF inovate lci wbo2 14psi of boost on 92 octaine gas.. also, a txs knocklite
my knock lite (set on min. sensitivity) is going off on decell

between 3900 and 5000 rpm, and i dont know what to do about it. I have tryed taking all the timing out under low / no load and it didnt do anything, i have also tryed setting the idle/decel timing down to like 7 deg (way lower than stock) and it sitll did it, not surprised thought because it is out of the opperating range of that table.
one other thing maybe you guys could help me with
ive tryed tuning my cold enrichment tables and it seems that no matter what i do, there is no affect.. i dont understand that.. but it is simply the way it is, also, i have noticed that volts latency change make no noticeable affects on idle when there is a high electrical load..
anyway, this is a base tune, so nevermind how not great that maps look..