I've emailed matt and pete and awaiting a reply on a replacement or repair of my board.
Thought i'd post up the issue in here incase anyone else has the below issues.
Basically my nistune board has gone fautly causing the following
Ecu not switching aircon relay to earth
Ignition timing intermittantly getting stuck at 20 degrees and below degrees of timing
Fueling issues going from cruise to wot unable to map out
All faults disappear when ecu jumper reverted back to stock position.
s14a 23710 82f00 ecu type 4 board faulty
Moderator: Matt
Re: s14a 23710 82f00 ecu type 4 board faulty
Sounds like base image issue. Will exchange over. I'll read out the current base image and copmare against factory when I recieve it here to see what is going on