E85 tunes... Type II board Twinturbo ZX

Results of any interesting tests done with or related to Nistune.

Moderator: Matt

Post Reply
txq45
 

Posts: 9
Joined: Fri May 16, 2008 1:54 am
Location: Plano. TX
Contact:

E85 tunes... Type II board Twinturbo ZX

Post by txq45 »

I've been running the Nistune for over a year and very happy with it,, but now I've almost finished changing out the fuel system for E85.. Here in Dallas Kroger now handles it..

Interesting to get some feedback on tunes logs etc using E85
zmyzgo
 

Posts: 29
Joined: Mon Aug 24, 2009 10:30 am
Location: Lee's Summit, MO, USA

Re: E85 tunes... Type II board Twinturbo ZX

Post by zmyzgo »

man is this co-incidence..????

I am presently changing over to a top feed fuel rail....have Walbro pump and Fuelab regulator...

the fisrt dyno on the NIStune showed that I had some production problems..therefore going to top feed...(tired of the side feed injectors)...

hopefully will have it tuned by after summer, so the fall can be great....

the tuner runs E85 in his S13/14, can't remember...

I am still on the fence, when I tune to go E85 or just 93 octane with the ethanol blend...plenty of station for the E85...better HP production, and I can get the sensor and gauge to monitor the % ethanol...

try to watch the postings...

good luck
txq45
 

Posts: 9
Joined: Fri May 16, 2008 1:54 am
Location: Plano. TX
Contact:

Re: E85 tunes... Type II board Twinturbo ZX

Post by txq45 »

Yes, your close... Mo I'm in TX
take a look at the Winfactory SS fuel rail and Bosh injectors .. this is for a 300zx

Dane in Houston is running E85 in his 300 but he was a big S13/S14 tuner...


I believe E85 is where everyone is going to be soon..so let the games begin...
zmyzgo
 

Posts: 29
Joined: Mon Aug 24, 2009 10:30 am
Location: Lee's Summit, MO, USA

been there...

Post by zmyzgo »

have the WIN rail in hand, went 870's...because of the sport 500's...but with the Smith manifolds/sport 700's and full split DP's, 2.5 " piping and 58mm TB...think I will do fine...

fall project...just trying to go to Midwest Z fest....for now,....
Post Reply