Page 1 of 1

E85 tunes... Type II board Twinturbo ZX

Posted: Tue Jul 27, 2010 7:28 am
by txq45
I've been running the Nistune for over a year and very happy with it,, but now I've almost finished changing out the fuel system for E85.. Here in Dallas Kroger now handles it..

Interesting to get some feedback on tunes logs etc using E85

Re: E85 tunes... Type II board Twinturbo ZX

Posted: Sun Aug 08, 2010 8:55 am
by zmyzgo
man is this co-incidence..????

I am presently changing over to a top feed fuel rail....have Walbro pump and Fuelab regulator...

the fisrt dyno on the NIStune showed that I had some production problems..therefore going to top feed...(tired of the side feed injectors)...

hopefully will have it tuned by after summer, so the fall can be great....

the tuner runs E85 in his S13/14, can't remember...

I am still on the fence, when I tune to go E85 or just 93 octane with the ethanol blend...plenty of station for the E85...better HP production, and I can get the sensor and gauge to monitor the % ethanol...

try to watch the postings...

good luck

Re: E85 tunes... Type II board Twinturbo ZX

Posted: Sun Aug 08, 2010 10:35 am
by txq45
Yes, your close... Mo I'm in TX
take a look at the Winfactory SS fuel rail and Bosh injectors .. this is for a 300zx

Dane in Houston is running E85 in his 300 but he was a big S13/S14 tuner...


I believe E85 is where everyone is going to be soon..so let the games begin...

been there...

Posted: Sun Aug 08, 2010 1:07 pm
by zmyzgo
have the WIN rail in hand, went 870's...because of the sport 500's...but with the Smith manifolds/sport 700's and full split DP's, 2.5 " piping and 58mm TB...think I will do fine...

fall project...just trying to go to Midwest Z fest....for now,....