Page 1 of 1
I need help, MAX PRM 7100 ............ ineed 8500 PRM ....
Posted: Thu Feb 23, 2012 6:54 pm
by kiselev46
I need help, MAX PRM 7100 ............ ineed 8500 PRM ....
ECU W10 AVENIR 23710-95N11
SR20VET GT28RS. 605cc.
Re: I need help, MAX PRM 7100 ............ ineed 8500 PRM ....
Posted: Thu Feb 23, 2012 6:55 pm
by kiselev46
kiselev46 wrote:I need help, MAX PRM 7100 ............ ineed 8500 PRM ....
ECU W10 AVENIR 23710-95N11
SR20VET GT28RS. 605cc.
Re: I need help, MAX PRM 7100 ............ ineed 8500 PRM ....
Posted: Thu Feb 23, 2012 6:55 pm
by kiselev46
kiselev46 wrote:kiselev46 wrote:I need help, MAX PRM 7100 ............ ineed 8500 PRM ....
ECU W10 AVENIR 23710-95N11
SR20VET GT28RS. 605cc.
Re: I need help, MAX PRM 7100 ............ ineed 8500 PRM ....
Posted: Fri Feb 24, 2012 1:51 am
by Fortmac180
adjust both rev limits to desired amount, u only have 1 set to 8200 and other set to 7k.
is your valvetrain stock? i would NOT recomend revving that high if it is.
ure Air fuel ratios are all messed up going way to rich most of time
Also ure fuel/rpm scale will need adjusting as its only set to 6400 rpm so u will be way up of the scale
drive around at 3500 low load and adjust K constant till u get desired afr's
adjust latency for idle afrs,
oh u have a VET? not sure bout those but i wouldnt rev my stock head DET that high