Using AEM Gauges

[djstatic]

Just thought I'd share some CSV files for anyone using the same AEM gauges as me (with the DLP of course).

The most popular would probably be the UGEO AFR

Petrol AFR:

afr1-AEM-PetrolAFR.csv

(389 Bytes) Downloaded 323 times

E85 AFR:

afr1-AEM-E85AFR.csv

(389 Bytes) Downloaded 315 times

Lambda:

afr1-Lambda.csv

(409 Bytes) Downloaded 310 times

[djstatic]

I also use their 35 PSI Boost Gauge (30-4406) on AUX1

The sensor that was bundled with my gauge is the 3.5 BAR/50 PSIa Brass Sensor (30-2131-50)

Positive is PSI, Negative is InHg (Same as the gauge display)

aux1-AEM Boost PSI-InHg.csv

(957 Bytes) Downloaded 294 times

Positive is PSI, Negative is also PSI

aux1-AEM Boost PSI.csv

(941 Bytes) Downloaded 303 times

Positive is Bar, Negative is also Bar

aux1-AEM Boost BAR.csv

(1.13 KiB) Downloaded 381 times

**Disclaimer**
I used the info available from AEM, So use at your own risk blah blah. Your stuff may be different than mine so review the files before using etc.

[rant]Why don't these a**holes make a water/oil temp gauge in Celsius! it's only a dip switch and a face plate[/rant]