Page 1 of 1
Type 3 Decel Loss, RPM, MAF and Temperature
Posted: Wed Mar 12, 2014 5:43 pm
by UNISA JECS
Hey Matt can you look into these, they seem to look like they make some sense, thanks.
Re: Type 3 Decel Loss, RPM, MAF and Temperature
Posted: Sun Mar 16, 2014 5:40 pm
by Matt
that is a later model B13 SR20DE ECU. tables may have been moved or different tables used. I'll have to udpate the address file for this one
Re: Type 3 Decel Loss, RPM, MAF and Temperature
Posted: Mon Mar 17, 2014 8:14 am
by UNISA JECS
Matt wrote:that is a later model B13 SR20DE ECU. tables may have been moved or different tables used. I'll have to udpate the address file for this one
Its a 92 and works under the 91-92 .ADR
Re: Type 3 Decel Loss, RPM, MAF and Temperature
Posted: Mon Mar 17, 2014 9:39 am
by Matt
I checked it out properly this morning. I've added different (incorrect) addresses for those parameters.
Not sure why now since the base addresses (used also for SR20DET) were correct. I've commented out those lines (attached)
Put this in your address folder