What's going on guys, I'm having stalling issues under deceleration, especially after rev past 2500-3000 rpm, doesn't matter if in gear or neutral, once you get off the throttle it gets super lean or super rich and dies
Tuner blamed it on IACV, replaced it, still happens, now they don't want anything to do with it, so I'm on my own
As you can see in the log from bin file, as the rpm goes down, the TP load, load index, and injection time go through the roof?
Little background:
92 KA24DET, manual swapped several years before build (never had problems with stalling), 9:1 compression, 750cc injectors, Z32 Maf, T3/T4 .57, stock cams, 15psi boost
Any help is greatly appreciated
KA24DET Stalling on deceleration
Moderator: Matt
Re: KA24DET Stalling on deceleration
Probably MAF reversion related. No log file here? Please attached
Also look at this document:
http://nistune.com/docs/Nistune%20MAF%2 ... 0Notes.pdf
Also look at this document:
http://nistune.com/docs/Nistune%20MAF%2 ... 0Notes.pdf
-
- Posts: 2
- Joined: Thu Jun 01, 2017 1:27 am
Re: KA24DET Stalling on deceleration
- Attachments
-
- KA-T.bin
- Ka24det stalling decel
- (32 KiB) Downloaded 108 times
Re: KA24DET Stalling on deceleration
Log files end with .log