Fan Control Question

Discussions concerning the M7790 cpu

Moderator: Matt

Post Reply
kostjazz
 

Posts: 13
Joined: Fri Feb 01, 2013 7:51 pm

Fan Control Question

Post by kostjazz »

Hi,

I'm trying to get nistune to control Fans on my Jap spec S15, but it seems that I cannot get it to go from one temp band to another.

No matter what temperature is only left top cell controls the fan.
Screen Shot 2019-05-04 at 1.20.52 pm.png
(1.39 MiB) Downloaded 667 times
On the pic you can see the temperature is 75deg, but still only leftmost cell controls the temp if I change the value to 34. Second cell from the left does nothing no matter what value I set.

Thanks in advance.

Would appreciate some help on this.

Cheers
Kostya
Matt
Site Admin
 

Posts: 8990
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Fan Control Question

Post by Matt »

Try setting the temperature range 0,70,75,80,85 and let me know if it gets into the other cells and controls the fans with the flags in those cells?
kostjazz
 

Posts: 13
Joined: Fri Feb 01, 2013 7:51 pm

Re: Fan Control Question

Post by kostjazz »

Hi Matt,

I don't know whether it did anything or not - but I think I figured what the problem was. It just jumped the second cell.

Basically it was staying in the first cell until the temperature reached the 3rd and went there. I haven't had a chance to try switch-off functionality on the cool-down but Im sure it's gonna be fine.
Post Reply