O² value to high

Discussions concerning the M7790 cpu

Moderator: Matt

Post Reply
Faan
 

Posts: 8
Joined: Sun Feb 17, 2019 6:52 am

O² value to high

Post by Faan »

Hi

I'm having a weird problem with my oxygen sensor of my S14a sr20det.

Cold or hot engine, it Always has a value of 2.55 even when its unplugged. :?:

Does the value normally need to be between 0 - 1?

What could be the problem?

Car runs perfect on idle, still on base map. (Original injectors and maf)


Greets from Belgium
Attachments
IMG_20190826_204639_resized_20190905_083345472.jpg
(1.96 MiB) Downloaded 879 times
IMG_20190904_193710_resized_20190905_083346714.jpg
(2.74 MiB) Downloaded 879 times
Top
Matt
Site Admin
 

Posts: 9005
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:
Contact Matt

Re: O² value to high

Post by Matt »

Check your wiring. Check the O2 input line and see voltage. Dare say its shorted to 12V
Top
Faan
 

Posts: 8
Joined: Sun Feb 17, 2019 6:52 am

Re: O² value to high

Post by Faan »

Matt wrote: ↑Fri Sep 06, 2019 10:23 pm Check your wiring. Check the O2 input line and see voltage. Dare say its shorted to 12V

Ok thx Matt, will check the input line tomorrow 8)

Does my fuel map look OK or?

It's an s14a sr20det , everything Original, except 3 inch exhaust and Apexi avcr @ 1.05 bar

greets
Top
Matt
Site Admin
 

Posts: 9005
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:
Contact Matt

Re: O² value to high

Post by Matt »

Looks smooth, but the AFR trace is what you need to really see
Top
Faan
 

Posts: 8
Joined: Sun Feb 17, 2019 6:52 am

Re: O² value to high

Post by Faan »

tested out de lambda with heating it, looked ok. 0-1v ..

But still wasn't sure, so i order a new one, problem solved 8) lambda is now 0.82-0.83


greets
Top
Post Reply

Return to “Type 3/4/5”