Nistune Forums

Hi Matt,

I know I may be in the minority, but I run nistune on an antique Asus Eeepc with a max resolution of 1024x600. The problem is the buttons on the toolbar go off the screen after the burn eeprom button, and I think occasionally the mapping windows will actually spawn off the screen.

Can there be a small screen mode, something that makes the icons smaller or in two lines, and ensures all windows open in the display boundary?

There is an option File > Configuration > Misc Settings > 'Hide emulator/WB2' to reduce the amount of buttons

You should be able to fit all the buttons in with this.

We used to have large/smaller buttons but the smaller ones were too tiny (especially on high DPI)

Pic posted above is 1024 x 600 (well 768 but I resized it down to about 600)

Ah thank you, I'd forgotten about that setting!

Holly crap, good to know. I have been using an asus netbook for my nistune for years!

I had the same problem. Unfortunately the hide emulator / WB2 button is not an option for me as I have 2x WB's I want/need to log.

If we had an option to just hide the emulator buttons this would help.

Mine is a Lenovo 8" tablet running Windows 10 Pro.

I was able to fix the problem by changing from the recommended resolution (1920x1200) to 1680x1050.

HTH someone else if they run into this problem

If we just drop the emulator buttons, that will still fit the screenshot above, so that is an option