Test versions

ByReaL · Post by **ByReaL** » Sun Oct 28, 2007 6:09 am

Matt can you post the changes and new things for test versions, i believe I/we could help with their testing, but some info will be good to know about that have improved/added

LMQT · Post by **LMQT** » Sun Oct 28, 2007 6:40 am

Yes it could be great

Please, coul'd you tell me (us ?) when the logging of switches (TP, neutral, etc) will be back ?
Sorry to incrust, but I don't want to create a separate topic just for this question and I haven't seen that elsewhere (but I'm not very good in english, I can have missed it)

Matt · Post by **Matt** » Mon Oct 29, 2007 1:54 pm

No probs. Test releases are made for people who are experiencing problems in the current 'released' software and need an immediate fix made and they then test if the fix works for them

Because there may be other code changes untested at the time, there is no baseline release made

Current list in my spreadsheet online has the following

10358 Zeitronix older models send 13 bytes instead of 14 Added auto frame detection for zeitronix ignoring last byte Enhancemen t High yes 0.9111
10507 Have specific directories for wideband files and allow user to select dir Enhancement High yes 0.9111
10357 IAT not operational There was no translation in table. Fixed Bug Low yes 0.9111
10422 Data from consult/wideband not synced properly There was delay between read buffer and state machine. Only delayed if not enough data Bug Med yes 0.9111
10510 Moates doesnâ€™t work on 27C512 socket on R33 board Requires 0x8000 offset to be added Bug Med yes 0.9111
10424 Zexel ECU consult broken by 10423 Fixed up timeouts from ECUs and cleaned up consult connect/disconnect Bug Med yes 0.9111
10525 Zexel injecton 50 - 500ms Bug Med yes 0.9111
10526 Zexel O2 RHS - Maps to boost/MAP sensor input Bug Med yes 0.9111
10528 Zexel ECU connects not always working Race condition between cmd/resp bytes and expecting buffer response Bug Med yes 0.9111
10529 Finish off selectable gauges coding Bug Med yes 0.9111
10535 VE maptracing on RPM incorrect for S14 KA Needs to be halved in maptrace Bug Med yes 0.9111
10359 Disable close windows together: does not allow individual window reopen Occurs when one window closed, cannot reopen without closing both linked windows Bug Med yes 0.9111
10360 O2 feedback flags not displaying comp value Changed double to DWORD Bug Med yes 0.9111
10362 Alpha, alpha learn and exhaust temp wrong scales Bug Med yes 0.9111
10363 Enable mulitple windows does not stay enabled in config menu Cut n paste errors. Bug Med yes 0.9111
10494 Logging aux name not displayed Check during record or playback. Appears to be okay currentlyâ€¦ check bug Med yes 0.9111
10357 Comp values incorrect for constant windows Bug Med yes 0.9111
10452 Append Timestamp/Number option after each log Enhancement Med yes 0.9111
10509 TP injection for emulator streaming Enhancement Med yes 0.9111
10530 Allow large guages (2x2) for display Enhancement Med yes 0.9111
10455 Cannot make maps below 14.7 AFR This cannot be done when O2 flag is off. Need O2 feedback on. Investigated Investigate Med yes 0.9111
10358 B13 consult and maptrace not working (calumsult) Invalid address for consult, TP. Fixed up ntlookup id table Bug Urgent yes 0.9111c
10356 Windows not showing Invalid 0x8001 saved from window. Added checking before saving/loading. Cause unknown Bug Urgent yes 0.9111d

Was not aware of a problem with the log switches breaking, so thank you for pointing that out. I will have a look into it

Logging is my current main issue that is currently being worked on. Once this is fully working again I will release a 0.9112 version.

Currently I've got a few jobs to finish off with orders pending so that is holding things up at the moment.

LMQT · Post by **LMQT** » Mon Oct 29, 2007 5:30 pm

OK, thanks.

'Knock Sense' and 'Knock fuel flags' are absent, but seen elsewhere that it is normal until you correct some minor problem, isn't it ?

'DCFlags' are completely absent since last stable version.

Matt · Post by **Matt** » Sun Nov 04, 2007 2:52 pm

There is another test release with some of the logging fixed up. Playback is back to normal now. Recording will not lose the load header or entries now when saving files.

Some small fixes still to be made with logging however. Try to get these resolved tonight

kenbam · Post by **kenbam** » Sun Nov 04, 2007 5:32 pm

Just adding to stuff i have found, if you check the "KNOCK" box on the ignition map, whilst driving the car it will not change the table cells red when it pings UNLESS you are recording the log as well.

Matt · Post by **Matt** » Sun Nov 04, 2007 9:20 pm

okay thanks. I've added it to the list

Matt · Post by **Matt** » Sun Nov 04, 2007 9:32 pm

The NIStune bug list excel spreadsheet has been updated with the latest list. Will continue working through this once I get back from Melbourne