Page 1 of 1
MFC thing
Posted: Mon Mar 31, 2008 7:40 am
by JCD
Hi Matt,
I've got this popup from time to time
http://ibconceptions.com/Nistune/files/mfc_206.jpg
on the laptop and on the desktop too.
Using NIStune_0.9248_setup.exe and the S13_CA18_256_E_fix.adr (with the # removed in that one line).
There are some other viewer issues too but that might be me being dumb
I'll try to put that into words and post in another topic.
Let me know if you need a log.
Cheers
Posted: Mon Mar 31, 2008 10:06 am
by Matt
thats a software crash
let me know what you are doing when it happens and if it is repeatable, I'll repeat here and find the cause of the problem
log files may help, but may not be necessary if I can repeat the steps
looks like you were doing some logging stuff? I'm working on logging at the moment (not saving all log files) so will do some extra testing around that area
Posted: Mon Mar 31, 2008 10:31 am
by Fusion Ed
I have had a couple too, but not repeatable I'm afraid. I can't remember the exact circumstances when it happens, I'll pay more attention next time.
Posted: Mon Mar 31, 2008 7:29 pm
by JCD
What I do:
1. Start Nistune
2. F7
3. Open the Wideband Input Tracer (Operations - Wideband Input Tracer)
4. Close the Wideband Input tracer
5. Close the Log Player
Then the Nistune program closes. I don't get that MFC popup but that might be because I'm at work ATM and working on a corporate network PC so things might behave differently. But anyway, this behaviour is reproducable.
When I play a log (between point 3 and 4), things do just the same.
Attached the debug log.
I don't want to sound negative but as I've planned a track session on wednesday I would prefer to have this logging and playing working without problems. Can I just reinstall a previous version (NIStune Version 0.9247 for example) by running the exe?
Posted: Tue Apr 01, 2008 1:46 am
by Matt
You can install over the top of previous versions without difficulty, but replacing the EXE by itself will not work
However I havent changed the logging code for a while and am currently in the middle on working on getting the glitches out
Given I've only just found out about this crash, see what I can do tomorrow night in regards to finding the cause and stopping it.
Posted: Wed Apr 02, 2008 8:03 am
by JCD
Been trying the previous versions. The problem exists from0.9233 on. Older versions don't have it.
Attached the content of the windows error report.
Hope it helps.
Posted: Wed Apr 02, 2008 3:20 pm
by Matt
thanks for finding that. I'll have a look into it. I've had ECUs and Type 4 prototypes arrive over last few days so havent had the time yet
Posted: Wed Apr 02, 2008 11:21 pm
by Matt
Repeated the steps. Got the problem. I'll try and get a 'beta' fix up tonight. But some of the logging stop/playback fixups are currently still work in progress.
Posted: Thu Apr 03, 2008 5:18 am
by JCD
There's no hurry.
I could record my logs today on the track and I will analyse them during the weekend.
Take it easy
but take it
Posted: Thu Apr 03, 2008 12:54 pm
by Matt
Well the fix is up now!
I just received my Type 4 boards so got the top priority software fixes done last night
Posted: Sun Apr 06, 2008 7:37 pm
by JCD
Works great :thumbs:
Good luck with the Type 4 boards
