Nistune Forums

man i'm really embarrassed right now, didn't scroll down far enough

i can't tune right now and have people scheduled this weekend.

i take it back. nistune is still working with calum. i tried it on my other laptop running vista no less. works just fine.

Matt, We're trying to use the calum again but looks like something has change on the newer builds. The last successful attempt with the calum was when we created this thread, so we're not sure which version it was that worked. I can connect with emutility just fine. Com ports the laptop assigns to i...

is there a jumper on the ecu that needs to be moved, like the SR ecus? was working on this again last night, even if i remove the eprom chip the car does exactly the same thing; starts but very rich. i've adjusted ttp min/max using the rescale option. also, i set the rev limit to 2000 rpm but when w...

trying to get this working but keep getting "Communications error in Emulator (SetCommState)". i noticed that the Emulator button does turn red but it doesn't work. the configuration menu is set for "Romulator/Ostrich" and port is auto. if use Emutility it connects to the ostrich...

i modified the stock .bin for sard 550cc, z32 maf, and T4 turbo, burnt it on a 27sf512 eprom and plugged it in the ecu but it runs extremely rich. AFR is around 7.4:1 at idle and doesn't change no matter what i do. tried adjusting the k constant to 100 and even lower but still no change. what am i d...

I know a few guys use ear phones hooked up to the knock sensor to "hear" the knock.

Is there any way to port that noise through the mic input on a laptop and have a voice recorder in the software "listening" to the engine?

Let me know what your guys' opinions are on this.

i don't have the factory narrow band O2 in my sr20det, just a wide band O2. works fine for me, i also have O2 feedback turned off

what exactly does this table do? i'm guessing it's similar to throttle tip-in fuel?

i noticed that "injection latency" changed. what's up with the new values?

matt, i always tune with o2 feedback OFF, with the new version of nistune, which check boxes does this? i see Bit0 thru Bit7

s13s came with a boost solenoid tho. was that not used to control boost?

Does anyone know where in the SR20 .bin the boost control table is located?

Trying to run an aftermarket boost solenoid and control boost with the rom.

You can call zeitronix and have them send you a new box.

Mine blew up(from too much heat @ a track day) and they sent me a new one for about $35USD.