Hows this look for an SR basemap?

[hottscennessey]

Hey Guys,

How does this look for a SR20DET basemap?

Z32 MAF, 680cc inectors, stock fuel pressure

Will the TP min/max cause an issue set at more or less stock values?

[PL]

K constant looks way too low. Should be around 32,000. And your load scales should go to about 120. Then flatten your fuel map out so max numbers are around 30.

TPmin/max shouldn't matter too much.

PL

[hottscennessey]

Thanks Pete,

Not sure how I screwed up calculating the K, I'll give it another try and see if it doesn't come out closer to your K estimate.