Hows this look for an SR basemap?

Discussions concerning the M7790 cpu

Moderator: Matt

Post Reply
hottscennessey
 

Posts: 10
Joined: Sun Nov 22, 2009 12:13 pm

Hows this look for an SR basemap?

Post by hottscennessey »

Hey Guys,

How does this look for a SR20DET basemap?

Z32 MAF, 680cc inectors, stock fuel pressure

Will the TP min/max cause an issue set at more or less stock values?
Attachments
sr 680 z32.bin
(32 KiB) Downloaded 204 times
PL
 

Posts: 957
Joined: Fri Feb 03, 2006 3:29 pm
Location: Adelaide, South Oz
Contact:

Re: Hows this look for an SR basemap?

Post by PL »

K constant looks way too low. Should be around 32,000. And your load scales should go to about 120. Then flatten your fuel map out so max numbers are around 30.

TPmin/max shouldn't matter too much.

PL
hottscennessey
 

Posts: 10
Joined: Sun Nov 22, 2009 12:13 pm

Re: Hows this look for an SR basemap?

Post by hottscennessey »

Thanks Pete,

Not sure how I screwed up calculating the K, I'll give it another try and see if it doesn't come out closer to your K estimate.
Post Reply