knock code 34 error Flag
Moderator: Matt
-
- Posts: 36
- Joined: Thu Dec 11, 2008 8:02 am
knock code 34 error Flag
Ive had this code thrown in my Nissan consult forever, Ive avoided dealing with it b/c the sensor is most likely bad. Because of that I've unchecked the knock sensor in the consult and disconnected it / unplugged it from the car. I can hit whatever boost I set my controller to but Im wondering if it still retards my timing. Anyone know?
Re: knock code 34 error Flag
It may still retard your timing with the flag being unticked for knock because of the fault code
I would recommend using 470K ohm resistor against the knock wire to ground if you want to remove it
I would recommend using 470K ohm resistor against the knock wire to ground if you want to remove it