Problems flashing featurepack

[Tommey]

Trying to flash the featurepack to my type 4 Board.
I can`t find an exact match to my ECU so i tried the one marked in the Attached photo.
Does not work.
Wich one to use?

Thanks!

11269580_10155580137285150_309289288_n.jpg

(76.75 KiB) Downloaded 3874 times

11272046_10155580137130150_560488007_n.jpg

(192.77 KiB) Downloaded 3874 times

[Matt]

Use 82F0F (replaces anything with 82F0x in it)

[Tommey]

I tried that one with no success. Any tricks when it wants to change address files?
I need to be able to load my map in.

[unex]

I tried that one with no success. Any tricks when it wants to change address files?
I need to be able to load my map in.

I would suggest you to explain in details what does it mean "I tried that one with no success."

[Tommey]

After flashing I got adress file mismatch and when I load my map it won't start.

[Matt]

Make sure you use the matching feature pack base map S14_SR20DET_82F0F_MT_EDM_FP_maps.bin

If you have a previous tune, you cannot just load it over the top (there are new and different parameters) otherwise it will mess up everything added to feature pack

Use File > Import to convert a previous tune to one for feature pack

[Tommey]

I have tried again with no success.
There isnt any EDM FP maps so i tried ADM and JDM.

I need a step by step explanation so i can get this up and running.

[Matt]

I see the problem... the 75F0F maps are not in the latest ROM pack

Attached are the files. Unzip them and put them in your Documents\Nistune\ROM_Pack\Type34\S14A_SR20DET folder

1. After this connect to your ECU
2. Load the S14_SR20DET_75F0F_MT_NATS_EDM_FP_maps.bin from this folde
3. File > Import > your previous tune
4. Upload to ECU

It should work from here. I'll fix the ROM pack up now to include this file

[Tommey]

This solved my problem, thanks Matt!

[Tommey]

This firmware does not support fans? I have to run them manually.
Have to change the firmware for a newer one?

[Matt]

Fan control temperature is adjustable in this feature pack version for S14/S14A/S15

Refer to the feature pack software guide for adjusting them